5 T/H Animal Feed Pellet Production Line Pig Cow Feed Pellet Making Machine

5 T/H Steam Conditioner Feed Pellet Machine Pig Cattle Animal Feed Pellet Production Line With Ring Die Pellet Line

Product Description:

• Ring mold pellet feed machine (also known as: ring mold pellet machine), belongs to the feed granulation equipment. Is the corn, soybean meal, straw, grass, rice husk and other crushed material directly pressed into pellets feed processing machinery. Widely used in large, medium and small aquaculture, food and feed processing plants, livestock farms, poultry farms, individual farmers and small and medium-sized farms, farmers or large, medium and small feed processing plants.
• Ring mold granulator is the main feed machinery and equipment for the production of pellet feed, its performance determines the feed production to a large extent, and occupies a very important position in the process of feed processing. Reasonable structure, advanced technology, high output, less power consumption, using gear drive, stepless speed feeding, can add appropriate amount of steam, molasses, grease and other materials as needed.

Features:

• The working principle of ring mold pellet feed machine
• 1. Feeding method: The material is transported to the tempering device through the adjustable feeding winch. In order to obtain good pelleting benefit (improve yield and quality), after adding water or steam for tempering, the material is tightly attached to the ring mold cover and the third wall of the ring mold (feeding area) through the inclined groove feeding pipe and the ring mold cover with the help of gravity and the centrifugal force generated by the ring mold rotation. Ring die granulator adopts mechanical forced feeding, high-speed rotation centrifugal distribution into the granulation chamber, through the scraper to distribute materials, feed uneven; The flat mold granulating machine relies on the material's own weight to enter the pressing chamber vertically and can feed evenly.
• Objective of feed conditioning
• A. It is beneficial to feed granulation and B. It improves the digestion and absorption rate of feed
• C. Increase the stability of aquatic pellet feed in water D. Increase the output of pelletizer and reduce power consumption E. Reduce die and roll wear
• (F) Destruction and extermination of harmful agents
• G. 2~3 liquid components can be added during the tempering process
• Mechanism of feed conditioning
• A.
• Feed conditioning is actually gas phase (steam), liquid phase (subtle water dispersion of water droplets)
• The process of transferring heat and mass to a solid phase (powdery material)
• In the process of feed conditioning, steam is both a heat transfer body and a moisture transfer body
• C. tempering is also the heat and quality in the steam through the surface of the powdery granular material
• The process of internal transfer.
• D. The conditioning of powdery material is that the steam is evenly around the powdery material, close to the particles
• The process of forming an interface layer on the surface of a material.
• 2. Discharge method: under the action of the feeding scraper, the material is uniformly and continuously fed into the wedge-shaped space formed by each press roll and ring die. Due to the gap between the working surface of the outer wall of the press roll and the working surface of the inner diameter of the ring die, only 0.1mm~0.3mm is formed, and this gap is basically constant, a certain extrusion pressure is formed. The flat die has low speed and low breakage rate.
• 3. Pressure: due to the feeding of the material, and the strong extrusion between the die and the roll, the material is compacted, squeezed into the die hole, and formed in the die hole, in the mold with the same diameter, the diameter of the ring die pressing wheel is limited by the diameter of the ring die, so the pressure is limited; The material is continuously fed into the pressing area, is extruded, and is continuously extruded from the die hole, and is cut into various required particle lengths by the cutting knife that can adjust the distance between the knife edge and the outer wall of the ring die, and the particle length is 1.5 to 2.0 times the diameter. Compared with the flat die, the size of the diameter of the flat die press wheel is not limited by the diameter of the die, which can increase the space of the internal bearing, and the selection of large bearings to enhance the bearing capacity of the press wheel, which not only improves the pressing force of the press wheel, but also extends the service life.
• 4. Pressure wheel adjustment mode: ring mold granulator is to use the two screws on the eccentric wheel in the middle of the pressure wheel to adjust the pressure; Flat molding granulator is the use of thread thread m100 central adjustment mechanism, lifting force of 100 tons, stable fall, soft touch, uniform pressure.

Technical Parameters:

Details: